380V 8.5kw 6 Poles Ye2 Series High Efficiency Three Phase Induction Motor

380V 8.5kw 6 Poles Ye2 Series High Efficiency Three Phase Induction Motor

Solution Description:
 
DC motor is a rotating motor that can convert DC electric powered vitality into mechanical power (DC motor) or mechanical vitality into DC electric powered vitality (DC generator). It is a motor that can change DC and mechanical strength into 1 yet another. When it runs as a motor, it is a immediate existing motor, which converts electrical strength into mechanical power when it runs as a generator, it is a immediate current generator, which converts mechanical strength into electrical energy.
 

Merchandise Title 380v eight.5kw 6 poles YE2 sequence Substantial Performance A few Phase induction Motor
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition framework The structure of DC motor should consist of two areas: stator and rotor. The static element of DC motor is called stator. The major perform of stator is to make magnetic field, which is composed of base, primary magnetic pole, commutation pole, end cap, bearing and brush unit. Managing element is called rotor, whose primary operate is to produce electromagnetic torque and inductive electromotive power. It is the hub of vitality conversion of DC motor. So it is also frequently named armature, which is composed of rotor, armature main, armature winding, commutator and supporter.
Model Z Sort
Seat amount Z315-Z1000
electrical power sixty~2800kW
Voltage 220~1000V
Torque assortment one.five ~180kNm
Safety stage IP23, IP44
Cooling manner IC06,IC17,IC37,IC81W
Running pace  Constant Pace /Reduced Speed /Adjust Speed /Large Speed Other 
Main classification DC Motor is a device that converts mechanical energy into DC power. It is primarily used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power supply of alternator. Although in areas in which DC electrical power is needed, AC energy rectifier is also utilised to change AC into DC electrical power, but from some aspects of overall performance, AC rectifier electricity source can not entirely change DC generator.  
Software DC motors are extensively utilised in tape recorders, video clip recorders, video clip discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Upkeep technique Skilled motor routine maintenance center motor servicing process: cleaning stator and rotor – changing carbon brush or other parts – vacuum F strain dipping paint – drying – Calibration balance.
1. Use surroundings need to be usually dry, motor surface should be retained thoroughly clean, air ingestion must not be hindered by dust, fibers and other road blocks.
two. When the thermal security of the motor continues to operate, it need to be ascertained whether or not the fault arrives from the motor or the overload or the placing benefit of the protecting system is also low. Right after reducing the fault, it can be set into procedure.
three, make certain that the motor is properly lubricated throughout operation. The general motor runs for about 5000 hours, that is to say, lubricating grease should be included or changed. When bearing overheating or lubricating deterioration is found in procedure, the hydraulic strain ought to modify lubricating grease in time. When changing grease, the old grease need to be eliminated, and the oil groove of bearing and bearing protect need to be washed with gasoline. Then ZL-three lithium grease must be filled with one/2 (2 poles) and 2/3 (4 poles, 6 poles and eight poles) of the cavity among the inner and outer rings of the bearing.
four. When the lifestyle of the bearing is over, the vibration and sound of the motor will enhance obviously. When the radial clearance of the bearing reaches the following benefit, the bearing must be replaced.
five, when taking away the motor, it is Alright to take away the rotor from the shaft extension or the non extension finish. If it is not essential to unload the fan, it is much more practical to just take out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from currently being ruined.
6. When changing the windings, the form, measurement, turns and gauges of the unique windings must be recorded. When these data are misplaced, they need to be received from the company and the first developed windings must be modified at will, which usually deteriorates one or many performance of the motor or even makes it unattainable to use them.

 

 

380V 8.5kw 6 Poles Ye2 Series High Efficiency Three Phase Induction Motor